Monday, 29 May 2017

Printer not found screen appears during installation in Hp Printe


Printer not found screen appears during installation in Hp Printer

1. Verify that the printer is turned on.
2. Verify that you have an active network connection.

Look at the light on the network connector on the back of the unit. If the light is on,
the printer is connected to a wired network. If the light is off, check the cable
connections from the printer to the gateway, router, or hub to ensure connections
are secure.

Verify that the printer is connected to the network with the cable that is packaged
with the printer.

If the connections are secure, recycle the power on your printer.
3. Print a configuration page. To print aconfiguration page, when the printer is in the
Ready state, press and hold the GO button until the Ready light starts blinking. For more
information, see Configuration page.

4. Verify that the printer’s internal networking component is set to its factory default
settings. If the print server was previously configured, it might need to be reset to the
factory default settings.
Communication mode: ad-hoc (peer-to-peer)
Network name (SSID): hpsetup
Encryption: disabled

Call Us Toll Free : +1-855-517-2433



You can check the print server's configuration by printing a configuration page. To
reset the printer to the factory settings, when the printer is turned off, press and
hold the GO and CANCEL buttons. Turn on the printer, and continue to hold the GO
and CANCEL buttons until all lights are blinking in unison.


5. Move the printer and the computer closer together. If the distance between your
computer and the printer is significant, try reducing the distance. If possible, provide a
clear path between the computer and print server, and minimize sources of radio
interference. For more information.  Visit To HP PRINTER PRINTER SUPPORT
Call Now +1-855-517-2433

No comments:

Post a Comment