new

Monday, 29 May 2017

How to Print from a software application

Print from a software application

Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific
types of paper or transparency film, or use special features.
1. Make sure you have paper loaded in the input tray.
2. On the File menu in your software application, click Print.
3. Make sure the HPAll-in-One is the selected printer.
4. If you need to change settings, click the button that opens the Properties dialog
box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
5. Select the appropriate options for your print job by using the features available on
the various tabs.
6. Click OK to close the Properties dialog box.
7. Click Print or OK to begin printing.


1. Make sure you have paper loaded in the input tray.
2. From the File menu in your software application, choose Page Setup.
3. Make sure the HPAll-in-One is the selected printer.
4. Specify the page attributes:
– Choose the paper size.
– Select the orientation.
– Enter the scaling percentage.
5. Click OK.
6. From the File menu in your software application, choose Print.
The Print dialog box appears, and the Copies & Pages panel opens.
7. Change the print settings for each option in the pop-up menu, as appropriate for
your project.
erview

How to fix message error "Remove and check cartridge" on HP Printers

Hp printer errors


hp printer
Hp printer
HP  printers for any situation with home and home office, small to large business and project

- Hewlett Packard which is a  well known kind when it comes to personal computer and laptops, also have various computer accessories to offer.

When  an HP printer has an slip, the root is clearly shown on the supervise. However, in other cases, the cause of the HPprinter error may be a complete inscrutability.

In its place of going on a wild-goose chase to find the exact result for the printer error, it's better to try a series of routine troubleshooting

SOLUTION : Call Now +1-855-517-2433

The message on the screen is Remove and check sealed unit or eradicate and check right cartridge or Remove and check left magazine.
It means, in some case, that the cartridge is defective.

But first, try these solutions,

Solution 1 : 
For some printer, check the back door: it must be blocked.

Solution 2:  Check the cartridges
HP PSC 1503, 1504, 1507, 1508, 1510, 1510v, 1510xi, 1513 et 1514
PSC 1100, 1200, 1300, 1400
PSC 1600, PSC 2350
HP Office jet 6210

Solution 3:  reset the printer
Power off the machine.
Unplug the power cord from the printer and from the wall outlet.
Wait for 1 minute.
Connect the power cord to the printer and the wall outlet.
Power on the printer.

solution4: About Us

Visit To Technical Supports For Hp Printer | Call Now +1-855-517-2433

Printer not found screen appears during installation in Hp Printe


Printer not found screen appears during installation in Hp Printer

1. Verify that the printer is turned on.
2. Verify that you have an active network connection.

Look at the light on the network connector on the back of the unit. If the light is on,
the printer is connected to a wired network. If the light is off, check the cable
connections from the printer to the gateway, router, or hub to ensure connections
are secure.

Verify that the printer is connected to the network with the cable that is packaged
with the printer.

If the connections are secure, recycle the power on your printer.
3. Print a configuration page. To print aconfiguration page, when the printer is in the
Ready state, press and hold the GO button until the Ready light starts blinking. For more
information, see Configuration page.

4. Verify that the printer’s internal networking component is set to its factory default
settings. If the print server was previously configured, it might need to be reset to the
factory default settings.
Communication mode: ad-hoc (peer-to-peer)
Network name (SSID): hpsetup
Encryption: disabled

Call Us Toll Free : +1-855-517-2433



You can check the print server's configuration by printing a configuration page. To
reset the printer to the factory settings, when the printer is turned off, press and
hold the GO and CANCEL buttons. Turn on the printer, and continue to hold the GO
and CANCEL buttons until all lights are blinking in unison.


5. Move the printer and the computer closer together. If the distance between your
computer and the printer is significant, try reducing the distance. If possible, provide a
clear path between the computer and print server, and minimize sources of radio
interference. For more information.  Visit To HP PRINTER PRINTER SUPPORT
Call Now +1-855-517-2433

Fixing Paper Jams or Paper Feed Problems for HP Officejet and PSC Series All-in-One Printers

Introduction

This document describes how to fix jams and paper-feed errors
Clearing a paper jam
Paper jams can be real or false. The unit might report a paper jam when there is not any jammed paper. The solution to a real paper jam or a false paper jam is the same.

·  Turn off the HP product and turn it around so the back of the unit faces you.
·  Disconnect the power cord from the back of the all-in-one. The power cord must be disconnected to allow the paper feed rollers to turn freely.
·  Locate the rear access door and then open it by turning the dial counter-clockwise and then pulling the door toward you.

 Call Us Toll Free : +1-855-517-2433
·  Inspect the pressure rollers on the rear access door and verify that they are clean and turn freely. Clean the rollers if needed with a soft towel lightly moistened with water. If the rollers do not turn freely, replace the rear access door.
Click How to buy on this page to order replacement parts.

Call Us Toll Free : +1-855-517-2433 
·  From the rear access door opening, remove the jammed paper. If some of the jammed paper cannot be removed from the rear access opening, carefully remove it from the front of the unit.
·  Remove the remaining paper from the paper supply tray. Discard any paper that is damaged or crumpled and then re-stack and reload the paper into the paper supply tray.
·  Reinstall the rear access door. 
                                              
·  Reconnect the power cord to the unit and turn the unit on.

Paper jams still occur 

Visit To HP PRINTER PRINTER SUPPORT


If the problem continues, check the following:
  1. Disconnect the power cord from the all-in-one and remove all paper from it.
  2. Open the rear access door and clean the paper feed rollers with a soft clean cloth lightly moistened with water. Reinstall the rear access door when finished. Verify that the rear access door is fully locked. The paper will skew if it is not fully locked.
  3. Open the print cartridge access door.
  4. Look into the front of the all-in-one. There are four small metal pressure rollers that ride on the main feed roller. Verify that there is no paper debris or labels stuck on these rollers. Carefully remove any debris using a tweezer or similar tool.
 If you facing any problem Call HP Support : 855-517-2433


Tuesday, 2 May 2017

Unable to print to network Hp printer

Hp printer
                                       Hp Printer

Hp printer networks


The printer is related to the network using an Ethernet cable

The Hp printer has a unchanging IP, default entryway, and subnet mask.

We can admittance the printer over the network using a web browser and the IP address, and we can print reports from the web boundary.

Easily print from your mobile device on your wireless network.

 Print just about anything when your smartphone  or tablet and printer are connected to the same network. . air print  is a mobile printing solution built into Apple devices that works with HP Printers.



We can install the imprinter without any error letters, and the printer show up with status "Ready" under diplomacy and Printers (Windows 7).

The HP grow software creates an HP port.  We have tried this haven and have gone to add a printer, installed it locally fashion a new TCP port with the IP tackle, but that has not work either.

We boast tried install the printer on two unusual computer, neither one can print to the printer.  When we try to carry a test leaf the page sites there for a few summary and then under category "Error - print"


visit:         HP PRINTER SUPPORT